Para la compra de cuaquier libro de este blogg puede mandar un correo electronico a info@ingenieriayarte.com o a traves de nuestra pagina web. www.ingenieriayarte.com indicandonos nombre, direccion, poblacion y telefono de contacto .Dentro de España los envios son realizados por mensajeria 24 horas a cargo de MRW. Canarias y Ceuta los envios son por Correos España mediante Paquete Azu

Para cualquier envio Internacional los envios son por Agencia de transporte a su domicilio.Puede efectuar su pedido a traves de www.ingenieriayarte.com de forma comoda calcula los gastos de envio

lunes, 16 de septiembre de 2013


Rock Mechanics for Resources, Energy and Environment
 Autor: Kwasniewski,Marek, Lydzba,Dariusz

This book contains the Proceedings of EUROCK 2013 – The 2013 ISRM International Symposium, which was held on 23-26 September 2013 in Wroclaw, Poland. The Symposium was organized by the ISRM National Group POLAND and the Institute of Geotechnics and Hydrotechnics of the Wroclaw Institute of Technology. The focus of the Symposium was on recent developments in the field of rock mechanics with an emphasis on the application of rock mechanics to the extraction of natural resources, securing energy supplies and protecting of the environment surrounding rock that is subjected to engineering activities.
The main topics, which were covered in the 150 papers (including six keynote papers) that make up this book are: rock mass characterization, laboratory and in-situ testing, constitutive models and numerical modeling, mathematical modeling of THM processes in rocks, mine design and ground control, underground storage and waste disposal, slope and open pit stability, dynamic phenomena in rock masses, design methodology in rock engineering, mechanical breakage of rocks, rock tunnel excavation and support, petroleum rock mechanics and geological CO2 sequestration. The book also includes the 2013 ISRM Franklin Lecture by A. Goricki on the engineering aspects of geotechnical tunnel design.
The book will be of interest and value to rock mechanics researchers as well as to professionals who are involved in the various branches of rock engineering.


The 2013 ISRM Franklin lecture
Engineering aspects of geotechnical tunnel design
A. Goricki
Keynote lectures
The mechanical behavior of salt and salt caverns
P. Bérest
The mechanisms and consequences of strong mining tremors that occur in Polish hard coal and copper mines
J. Dubinski
Geomechanical aspects of shale gas development
M.B. Dusseault
An overview of underground rock engineering risk
J.A. Hudson
Optimization, sensitivity and robustness analysis – Applications and trends in geomechanics
H. Konietzky & R. Schlegel
Geomechanical modeling of CO2 storage in deep saline aquifers – A review
X. Li, W. Yuan, B. Bai, M. Liu & H. He
1. Rock mass characterization
A preliminary geoengineering assessment of Bazda antique underground quarries in¸ Sanlıurfa, Turkey
C. Agan, M.I. Yesilnacar, M. Genis, S. Kulaksız, R. Ulusay, Ö. Aydan & M.D. Yücel
The geological and geotechnical susceptibility of Jurassic and Cretaceous units; A case study from Central-Western Portugal
P.S. Andrade, H. Ventura & P.M. Callapez
Characterisation and propagation of epistemic uncertainty in rock engineering: A slope stability example
A. Bedi & J.P. Harrison
Characterization of the “Chaotic Complex” (Northern Apennines, Italy)
M. Coli & M. Tanzini
Impact of expertise on rock fall assessment – An original study
A. Delonca, T. Verdel & Y. Gunzburger
Seismic reflections around a tunnel “viewed” through waveguides – A case study
J.M. Descour & H. Hume
Comparison between different estimators of the degree of rock mass fracturing
A.M. Ferrero, M.R. Migliazza & G. Umili
Passive three-dimensional microseismic imaging for mining-induced rock-mass degradation
J.-W. Huang, J.M. Reyes-Montes & R.P. Young
ERMR system and correlations with known rock mass rating systems
M. Jovanovski & I. Peshevski
Assessing the mechanical properties of a rock using indentation tests
H.-T. Le, F. Descamps, J.-P. Tshibangu, J.-F. Nauroy, O. Vincké & L. Cangémi
Rock mechanical aspects for cavern stability
T. Pilgerstorfer, H.Wannenmacher, K. Grossauer, A. Stucki & B. Schwegler
Study of the relation between cracks and the elastic properties of rock mass
I. Stan-Kłeczek & A.F. Idziak
Rock physical interpretation of the seismic properties of the excavation disturbed zone
T. Takahashi & S. Tanaka
Depth distribution of lithospheric strength determined by the self-unbalancing shear rupture mechanism
B.G. Tarasov
Geomechanical attributes of reconstituted Indian coals under carbon dioxide saturation
V. Vishal, P.G. Ranjith & T.N. Singh
Adjustment of rock mass strength parameters using direct shear tests carried out on large blocks
G.J. Zapata & A.P. Assis
Determination of the extent of fractured zones around mine openings using the resistivity and GPR methods
B. Zogała, M.J. Mendecki, W.M. Zuberek, T. Gołebiowski & W. Antonik
2. Laboratory and in-situ testing
On the accuracy of the in-situ Schmidt hammer test on carbonate rocks
H. Arman, W. Hashem, O. Abdelghany & A. Aldahan
Rockfall: Scaling factors for the Coefficient of Restitution
P. Asteriou, H. Saroglou & G. Tsiambaos
Nano-indentation tests on partially satured argillite: Experimental device and measurements
C. Auvray, R. Giot & D. Grgic
Measuring stress induced electric field in sandstone and granite using the Electric Potential Sensor
A. Aydın, M.R. Dobbs, H.J. Reeves, C.C. Graham & M.P. Kirkham
Characterization of the distribution of physical and mechanical properties of rocks at the Tutupan coal mine, South Kalimantan, Indonesia
M.A. Azizi, S. Kramadibrata, R.K.Wattimena & I.D. Sidi
Experimental study of the permeability evolution of a rock fracture under THMC conditions
A. Blaisonneau, M. Peter-Borie & S. Gentier
Simulation of single cutter experiments in evaporite using the discrete element method
C. Carrapatoso, S.A.B. da Fontoura, I.M.R. Martinez, N. Inoue, A. Lourenço & D. Curry
Damage and plasticity rate dependence of Luna limestone in uniaxial compression
J. Cieslik
Effective stresses in cohesive discontinuous rocks around a vertical drill hole
P. Ciobanu
A database to manage rock mechanical properties and assess formation abrasiveness for drilling
F. Descamps, J.-P. Tshibangu, N. da Silva & S. Regnard
Effect of an increase in rotation in a wear test to predict the durability of rock materials
J.L.E. Dias Filho, G.C. Xavier & P.C.A. Maia
The elastic wave velocity in rocks under triaxial stress at high pressure and temperature
A. Dziedzic & J. Pininska
Environmental characterization of the stress-corrosion cracking of rockbolts in underground coal mines using laboratory and in-situ testing
E. Elias, D. Vandermaat, A. Crosky, S. Saydam, P. Hagan, B.K. Hebblewhite & P. Craig
Effect of constant and varying mean stress levels of cyclic loading on the indirect tensile strength of rocks
N. Erarslan
Tensile fracturing of anisotropic Brisbane phyllite
N. Erarslan, D.J.Williams & A. Shokouhi
A new test for the characterization of highly jointed rock masses
C. González-Nicieza, M.B. Prendes-Gero, R. Fernandez-Rodriguez & F. Lopez-Gayarre
Influence of chemo-mineralogical transformations on micro/macro-mechanical properties of ironstone
D. Grgic
Influence of water vapor pressure in surrounding environment on strength and fracture toughness of rocks
M. Kataoka, Y. Obara & H.S. Jeong
Susceptibility of rock materials used in the construction of monuments to long-term salt crystallization
A.K. Kłopotowska & P.J. Łukaszewski
Beachrock mapping by geophysical exploration: Application toYagaji Island in Okinawa, Japan
R. Kubo, S. Kawasaki, K. Suzuki, S. Yamaguchi & T. Hata
Physical and mechanical characterization of weak schistose rocks
T. Le Cor, D. Rangeard, V. Merrien-Soukatchoff & J. Simon
Thermal conductivity of rocks under high pressure conditions
W. Lin, O. Tadai, T. Hirose,W. Tanikawa, M. Kinoshita, H. Mukoyoshi & M. Takahashi
Developing a high capacity direct shear apparatus for the large scale laboratory testing of rock joints
Z. Moradian, C. Gravel, A. Fathi, G. Ballivy, P. Rivard & M. Quirion
Some remarks on the experimental determination of the Biot coefficients
A. Nowakowski & J.Walaszczyk
Dynamic and static rock mechanical properties of heavy oil sandstones
C. Rabe, P. Perdomo & J. Cherrez
Selection and interpretation of shear strength parameters for weak phyllites
G.V. Ramana, Shashank Pathak & Nripendra Kumar
Evaluation of specific cutting energy in the circular sawing with the elastic parameters of rocks
N. Sengun, I. Ugur, S. Demirdag & R. Altindag
Strength behaviour of reinforced natural jointed rock
L.P. Srivastava & M. Singh
Estimation of the effects of the centrifugal hydraulic conductivity of impermeable rocks under constant head conditions
M. Takahashi,W. Lin & M. Kato
An in-situ monitoring system for natural temperature and relative humidity
A.J. Taylor, J.C. Cripps & S.D. Clarke
Micro-textural controlled variations of the geomechanical properties of andesites
Ö. Ündül, F. Amann, N. Aysal & M. Plötze
Loss slake index evaluation and its applicability to marl
G. Vlastelica, P. Mišcevic & D. Salvezani
Effect of scratch length on the Cerchar abrasivity index
O. Yaralı, H. Aydın, H. Duru &A. Özarslan
3. Constitutive models and numerical modeling
Strain-softening characterization of granitic rocks and numerical simulation of servo-controlled strength tests
J. Arzúa, J. Barbiero & L.R. Alejano
A constitutive model for jointed rock mass
A. Azami, T. Yacoub, J. Curran & D.Wai
Numerical investigation of asperity degradation in the direct shear test of rock joints
M. Bahaaddini, P. Hagan, R. Mitra & B.K. Hebblewhite
Micromechanics of geocomposites: CT images and FEM simulations
R. Blaheta, R. Kohut, A. Kolcun, K. Soucek & L. Staš
The coupled hydro-mechanical approach for fluid compressibility problems in porous media
S.R.C. Brant, M.P. Cordão Neto & I. Fernandes Gomes
Rheological behavior of jointed rock masses inferred from an analogue laboratory testing approach
M.E. Discenza, S. Martino, G. Scarascia Mugnozza, L. Stedile, A. Bretschneider & M. Teodori
Numerical simulation of the impact of a rock fall impact on a flexible barrier using Abaqus/Explicit 6.12
J.P. Escallón, C.Wendeler & M. Mrozik
Global methodology for the evaluation of the stress field in a rock mass from in-situ tests.
Application to the Salamonde II powerhouse cavern
M. Espada, L. Lamas, N. Leitão & B. Figueiredo
Influence of rock mass creep on tunnel loading
P. Fortsakis, A. Kalos, V. Despotaki & M.J. Kavvadas
A new time-dependent constitutive model and its application in underground construction
M. Karami & A. Fahimifar
Efficient and numerically stable anisotropic failure criterion for micro layered rock
M. Kawa & D. Łydzba
An extended Lemaitre’s viscoplastic model
X. Lei & F.L. Pellet
Modeling fault activation due to the evolution of remote stresses
M.T. Myers, V.A. Dunayevsky & M.B. Bennett
A case study of large scale rock mass preconditioning by confined blasting
I. Onederra, A. Catalan & G. Chitombo
Back analysis of rock mass behavior of the Quintner Limestone at the Gonzen mine near Sargans, Switzerland
M.A. Perras, E. Ghazvinian, M.S. Diederichs, F. Amann & H.Wannenmacher
Numerical simulation of the water jet excavation of soft rock saturated with water
K. Sakaguchi, Y. Yumoto & A. Kizaki
Elastic response of laterally loaded rock sockets using 3D finite element analyses
K.P. Tzivakos, M.J. Kavvadas & D.G. Kaltsas
The influence of the type of pore fluid in two-phase media on the form of consolidation equations
A. Uciechowska &T. Strzelecki
AWeibull distribution-based constitutive model of creep of salt rock
H.W. Zhou, J.Y. Ding, J.D. Liu & J.F. Liu
4. Mathematical modeling of coupled T-H-M processes in rocks
Definition and implementation of a fully coupled THM model for unsaturated rocks
A. Haxaire, V. Galavi & R.B.J. Brinkgreve
A study on shear characteristics of a smooth rock surface under different thermal, hydro and mechanical conditions
T. Kim, N. Zhang & S. Jeon
Periodic character of failure near openings in high-stress rock mass conditions
V.V. Makarov, L.S. Ksendzenko, N.A. Opanasyuk & A.M. Golosov
Three-dimensional modeling of a coupled shear-flow test on soft sedimentary rock
H. Park, K. Ito, M. Takahashi, M. Osada & G. Smolnik
Study of thermo-hydro-mechanical processes at the potential site of an Indian nuclear waste repository
A.K. Verma, T.N. Singh & R.K. Bajpai
Numerical modeling of induced seismicity associated with fluid injection and withdrawal using 2D discrete element fracture network model
J.S. Yoon, A. Zang, G. Zimmermann & O. Stephansson
5. Mine design and ground control
Strength of faults – A concern for mining engineers?
M. Alber
Critical energy and mine rockburst potential
M. Al Heib, G. Lafont, C. Didier, Y. Gunzburger, J.P. Piguet,W. Pytel & H. Mitri
The design and results of an innovative instrumentation method for monitoring and improving the excavation of a road tunnel in a highly fractured and strained rock mass
M.I. Álvarez-Fernández, M.B. Prendes-Gero, I.N. Álvarez-Garcia &A.O. Oliva-González
The shape effect and rock mass structural control for mine pillar design
L.A. Ayres da Silva, A.L.M. Ayres da Silva & E.C. Sansone
The residual risk of an abandoned mine
D. Brambilla, L. Longoni, M. Papini, D. Arosio & L. Zanzi
Analysis of the consequences of mining exploitation in substantially disturbed strata based on spatial measurements of a building’s tilt
L. Florkowska &A. Kanciruk
Geomechanical and geotechnical evaluation of maingate No. 080 5253 monitoring in the conditions of the Paskov mine
R. Kukutsch, K. Soucek, P. Konicek, J. Ptácek, P.Waclawik & R. Šnupárek
Stability analysis of deep coal mine main roadways for pumped hydropower lower reservoir storage
A. Özarslan, H.Y. Aydıner, E. Köken & M. Alber
Overburden deformation and damage caused by the construction of a hard rock tunnel – An analysis and countermeasures
G. Yu, S. Lu, D. Meng & G. Ouyang
6. Underground storage and waste disposal
Modeling the Excavation Damaged Zones in the Bátaapáti radioactive waste repository
F. Deák, L. Kovács & B. Vásárhelyi
Quantitative roughness profiling of fracture surfaces of a granitic host rock at a radioactive waste disposal site
Á. Krupa, F. Deák, P. Görög, I. Buocz & Á. Török
Rock mechanics for gas storage caverns with respect to optimization of operation
B. Leuger, K. Staudtmeister & D. Zapf
Feasibility and behavior of a full scale disposal cell in a deep clay layer
J. Morel, F. Bumbieler, N. Conil & G. Armand
Temporal analysis of fracturing using acoustic emissions at the Aspö Pillar Stability Experiment
H.C. Moretti, J.M. Reyes-Montes, J.R. Haycox & R.P. Young
7. Slope and open pit stability
Conditions of stability in a marl and limestone opencast mine
Z. Bednarczyk
An on-line landslide monitoring system in flysch Carpathians
Z. Bednarczyk
Swelling rocks in an open pit mine
M.E. Bilir & E. Aydıngun
The role of shear surface geometry in the definition of deep-seated gravitational slope deformation thresholds
D. Brambilla, L. Longoni, M. Papini, D. Arosio & L. Zanzi
Large scale field tests for slope stabilizations made with flexible facings
M. Cala, M. Stolz, P. Baraniak, A. Rist &A. Roduner
Application of stochastic methods for the strain and stability analysis of a slope
E. Hrubešová, B. Luˇnácková &T. Petrik
Physical modeling and simulation of slope failure by means of centrifuge acceleration
S. Kramadibrata, R.K.Wattimena, M.A. Azizi, Y.Wicaksana & I.D. Sidi
A safety inspection system for large-scale slopes in Korea
J.G. Lee, B.S. Jang, S.W. Bae, J.S. Moon, H.J. Sin & J.H. Park
Basic kinematic analysis of a rock slope using terrestrial 3D laser scanning on the M-22 highroad pilot site
M. Marjanovic, B. Abolmasov, U. Djuric, S. Zecevic & V. Šušic
Microseismicity due to gravity-induced rock-mass deformations and a related alarm system
S. Martino, A. Prestininzi, S. Rivellino, L. Lenti & A. Paciello
Comparison between the mechanical behavior of barriers against rock fall vs debris flows
A. Segalini, R. Brighenti, A.M. Ferrero & G. Umili
Rock fall modeling for protection barrier design and validation in the Sungun copper mine
R. Tajaddodian Far, N. Behi & F. Alilou
Slope optimization and design based on geotechnical and hydrogeological assessments for a new deep open pit coal mine
R. Ulusay, M. Ekmekci, E. Tuncay & N. Hasancebi
Influence of accuracy in specifying design input data on stability safety factors for excavated slopes in an open pit mine
V.K. Vavilova
Monitoring unstable slopes using Persistent Scatterers Interferometry: opportunities and challenges
J.Wasowski, F. Bovenga, D. Nitti & R. Nutricato
8. Dynamic phenomena in rock masses
Large scale field tests of rock bolts and high-tensile steel wire mesh subjected to dynamic loading
M. Cala, A. Roth & A. Roduner
Unifying energetic approach for the control of ground vibrations
C. Dinis da Gama
A numerical study on the ground amplifications in areas above abandoned room and pillar mines and old longwall mines
M. Genis & Ö. Aydan
Spatio-temporal analysis of the influence of mining on the surface – A case study from the Ostrava-Karviná Coal Field
E. Jiránková & P.Waclawik
Control of rockburst risk in hard coal longwall mining – A case study
P. Konicek, R. Kukutsch, J. Ptácek, K. Soucek, L. Staš & P.Waclawik
Integration of geomechanical and geophysical analysis methods for the prediction of seismic events in underground mining
B. Orlecka-Sikora & W. Pytel
Determination of dynamic rock strength to assess blasting efficiency
F.L. Pellet, V.K. Dang, C. Baumont, M. Dusseux & G.J. Huang
Dynamic modelling of a mining-induced fault slip
A. Sainoki & H. Mitri
The estimation of the effectiveness of torpedo blasting based on an analysis of focal mechanisms of induced mining tremors in the Bielszowice coal mine
Ł. Wojtecki, M.J. Mendecki, A. Talaga & W.M. Zuberek
9. Design methodology in rock engineering
Rock engineering design and the evolution of Eurocode 7
L.R. Alejano, A. Bedi, A. Bond, A.M. Ferrero, J.P. Harrison, L. Lamas, M.R. Migliazza, R. Olsson, Á. Perucho, A. Sofianos, H. Stille & D. Virely
Risk management approach for the design of underground constructions
B. Amusin & J. Eisenberg
A new design approach for rockfall barriers
A. Grimod & G. Giacchetti
Influence of in-situ stress variation on results of back analyses – an open pit case study
M. Grošic, D. Vidovic & Ž. Arbanas
The contribution of rock mechanics to small-scale mining in Indonesia
P.N. Hartami, B. Nugroho, S. Mayangsari & Nurhardono
Index of time-dependency for rock and its application for the assessment of the long-term stability of underground structures
K. Hashiba & K. Fukui
Rock ledge support design. A deterministic and stochastic approach
J. Jakubowski & J.B. Stypulkowski
Protection of a tunnel entrance from rockfall risk
C. Mignelli, K. Daneshmand & D. Peila
Infrared thermography methodology applied to detect localized rockfalls in self-supporting underground mines
M.B. Prendes-Gero, F.J. Suárez-Domínguez, C. González-Nicieza & M.I. Álvarez-Fernández
Are classification systems outdated?
W. Schubert
Sensitivity analysis of the generalized Hoek-Brown failure criterion
P. Ván & B. Vásárhelyi
Analysis and treatment of a diversion tunnel in adverse geological conditions: A case study from south-western China
J.K. Yang, Y.F.Wang & D.F. Chen
Excavation and monitoring of the main tailrace tunnels of the Xiangjiaba underground power station
Z. Yi
Periphery mapping in NATM tunnels
B. Yilmaz & H. Keskin Citiroglu
10. Mechanical breakage of rocks
Investigations on the fracture behaviour of rocks in a triaxial compression test
L. Baumgarten & H. Konietzky
The relationships between Drilling Rate Index (DRI), physico-mechanical properties and specific cutting energy for some carbonate rocks
G. Ekincioglu, R. Altindag, N. Sengun, S. Demirdag & A. Guney
A new small scale rock cutting test
M. Entacher, S. Lorenz, R. Galler & G.Winter
Emission analysis of the cutting tools used for hard rock cutting with regard to status monitoring
K. Nienhaus, C. Kuchinke & D. Röllinger
3D elastic solutions for point load and Brazilian indirect tensile strength tests
M. Serati, H. Alehossein, N. Erarslan & D.J.Williams
11. Rock tunnel excavation and support
Underground construction at high altitudes: A case history on Mont Blanc in Italy
G. Bragonzi, P. Cancelli, R. Castellanza & G. Frigerio
Evaluation of geological conditions ahead of a tunnel face using the Tunnel Seismic Prediction method (TSP) – Lesson learned from the Pahang-Selangor raw water transfer tunnel, Malaysia
M.A.M. Ismail, R. Azit, S.M. Ng, H. Zabidi, N. Bakhudin & Z. Nordin
Tunnel behaviour and support in molassic rocks. Experience from 12 tunnels in Greece
V. Marinos, G. Prountzopoulos & P. Fortsakis
New yielding elements for tunnel linings: Design requirements, layout and influence on system behavior
W. Schubert & N. Radoncic
A Rock Mass Rating system for predicting TBM utilization 921
S. Yagiz, T. Kim, O. Frough & S.R. Torabi
12. Petroleum rock mechanics
Observations of the intrinsic acoustic anisotropy of sands in various geologic settings
L.A. Hathon & M.T. Myers
Well stimulation on the basis of preliminary triaxial tests of reservoir rock
V.I. Karev & Yu.F. Kovalenko
Evaluation of stress changes due to multi-stage hydraulic fracturing – Consideration of field results
N.B. Nagel, F. Zhang, M.A. Sanchez-Nagel & B. Lee
Analysis of the hydromechanical behavior of fault zones in petroleum reservoirs
G.L. Righetto, C.E.R. Lautenschläger, N. Inoue & S.A.B. da Fontoura
13. Geological CO2 sequestration
AE monitoring of hydraulic fracturing experiments conducted using CO2 and water
T. Ishida, Y. Nagaya, S. Inui, K. Aoyagi, Y. Nara, Y. Chen, Q. Chen & Y. Nakayama
Effects of vertical stress on fracture propagation using super critical carbon dioxide
A. Kizaki, K. Ohashi, H. Tanaka & K. Sakaguchi
Assessing the geomechanical effects of CO2 injection in a depleted gas field in Poland by field scale modelling
B. Orlic, M. Mazurowski, B. Papiernik & S. Nagy
Subject index
Author index

  • Páginas: 1000
  • Tamaño: 17x24
  • Edición:
  • Idioma: Inglés
  • Año: 2013
  • PRECIO  245,00